Superman/Flash HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 154.48x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2mm #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Blue At layer #6 (0.56mm) swap to Black At layer #11 (0.96mm) swap to Red At layer #15 (1.28mm) swap to YellowBorder Only Colors from here until the end. At layer #18 (1.52mm) swap to Jade White for the rest. I have added a pause right before the black switches to red (layer 10) to allow you to switch the colors in the AMS. When the print pauses, simply switch blue to white and resume the