Superman Hueforge - Logo S

Projet: Logo superman.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm   The Model is 240x192.94mm in size You may print at higher layer heights below the Base Thickness of 1.28mm The Max allowed Thickness is 3.04mm and the Actual Thickness is 3.04mm   Filaments utilisés:      PLA BambuLab Basic Black Transmission Distance: 0.6     PLA Bambulab Litho Cyan Transmission Distance: 1.7     PLA BambuLab Basic Red Transmission Distance: 4     PLA BambuLab Basic Jade White Transmission Distance: 5     PLA BambuLab Basic Yellow Transmission Distance: 5.5 This print uses 5 unique filaments   Instructions de changements:     Commencer par Black     At layer #18 (1.52mm) swap to Cyan     At layer #19 (1.6mm) swap to Black     At layer #21 (1.76mm) swap to Red     At layer #26 (2.16mm) swap to Jade White     At layer #27 (2.24mm) swap to Yellow     At layer #28 (2.32mm) swap to Jade White     At layer #29 (2.4mm) swap to Yellow     At layer #30 (2.48mm) swap to Jade White pour le reste.