Superman Hueforge - Logo S

MembershipBoost MeProjet: Logo superman.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 240x192.94mm in sizeYou may print at higher layer heights below the Base Thickness of 1.28mmThe Max allowed Thickness is 3.04mm and the Actual Thickness is 3.04mm Filaments utilisés: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA Bambulab Litho Cyan Transmission Distance: 1.7 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 5.5This print uses 5 unique filaments Instructions de changements: Commencer par Black At layer #18 (1.52mm) swap to Cyan At layer #19 (1.6mm) swap to Black At layer #21 (1.76mm) swap to Red At layer #26 (2.16mm) swap to Jade White At layer #27 (2.24mm) swap to Yellow At layer #28 (2.32mm) swap to Jade White At layer #29 (2.4mm) swap to Yellow At layer #30 (2.48mm) swap to Jade White pour le reste. Comment imprimer plus de