Superman Hueforge

Project: Superman.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 128.58x225.01mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Red At layer #20 (1.68mm) swap to Blue At layer #23 (1.92mm) swap to Jade White At layer #24 (2mm) swap to Mandarin Orange At layer #25 (2.08mm) swap to Jade White for the rest. Another Hueforge, really like this one as superman looks really good here. dialing in my hueforge thickness to try and use less black then actually needed while still being thick enough not