Superman Logo Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm   The Model is 112.06x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.8mm   Filaments Used: PLA Smart Recycled Dark Blue Transmission Distance: 0.5 PLA Smart Recycled Red Transmission Distance: 4.4 This print uses 2 unique filaments   Swap Instructions: Start with Dark Blue At layer #7 (0.64mm) swap to Red for the rest.