Superman Sketchy

by Mano's 3d_Art · Hueforge & Lithophane

9 Downloads

10 Likes

5 Makes

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 100x160mm in sizeYou may print at higher layer heights below the Min Depth of 0.88mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Cyan Transmission Distance: 3.5 PLA Kingroon Red Transmission Distance: 4.1 PLA BambuLab Basic Beige Transmission Distance: 8This print uses 4 unique filaments Swap Instructions: Start with Black At layer #14 (1.2mm) swap to Cyan At layer #16 (1.36mm) swap to Red At layer #21 (1.76mm) swap to Beige for the rest.