Support for Y-splitters for the side mount

I had already printed and mounted on an X1C the “Bambu X1C/P1S side mount spool holder v2” (thank you, BC Designs!) and when I decided to also use one of the many Y connectors that can be found on Makerworld I realized that the support for the filament was an obstacle to attaching the Y connector to the X1C.I then decided to design a stand to stabilize the Y-connectors to the “spool holder v2” and I upload my result here.I chose to fix the connector with two nylon cable ties, that’ll fit any type of connector, but you could easily use some kind of adhesive as well.The 2 10x3 mm magnets are enough stable for me, but there is also the possibility of using a small screw.I'm a PETG lover, but you could use any kind of filament, also it is a tiny piece, so print it with a good brim, I don't use supports, but the small overhangs need some cleaning at the end.I hope that someone, like me, will really appreciate both of these accessories, so will be able to use them at the same time in a stabl