supra hueforge

The printed model is using whatever random colors i had loaded on the AMS. I printed them to verify the print came out good. Project: supra.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mmFilaments Used: PLA PolyLite Grey Transmission Distance: 1 PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Grey At layer #5 (0.48mm) swap to Black At layer #11 (0.96mm) swap to Blue Gray At layer #15 (1.28mm) swap to White for the rest.