Thingiverse
Surface Pro 4 Minimalist Wall Mount
by cperuffo3
6
Downloads
12
Likes
0
Makes
This is a model I made to mount an old Surface Pro 4 I had around to be a smart-home control tablet. It MAY fit other surface products but I have not tested them.
It mounts to any wall using standard #6 screws.
To place the screws properly, use the printed assembly as a template without the tablet. Mark the hole locations (and mark the 2 top corner edges to help later with placing the tablet properly.
Clip the parts around the tablet, seat the dovetail, line the top corners up with your marks from before, and then slide the whole assembly onto the pre-mounted screws.
To modify to fit your needs, the onshape file is here:
https://cad.onshape.com/documents/5259a7e2b8abd9b73e57ba43/w/1db2b555dfe6ba42e3f26bf0/e/eec159a738a9484dc39ef5fd?renderMode=0&uiState=64f397d3a53d1304f888eb4f
Enjoy!
It mounts to any wall using standard #6 screws.
To place the screws properly, use the printed assembly as a template without the tablet. Mark the hole locations (and mark the 2 top corner edges to help later with placing the tablet properly.
Clip the parts around the tablet, seat the dovetail, line the top corners up with your marks from before, and then slide the whole assembly onto the pre-mounted screws.
To modify to fit your needs, the onshape file is here:
https://cad.onshape.com/documents/5259a7e2b8abd9b73e57ba43/w/1db2b555dfe6ba42e3f26bf0/e/eec159a738a9484dc39ef5fd?renderMode=0&uiState=64f397d3a53d1304f888eb4f
Enjoy!
cperuffo3 also publishes on
12 additional models across 2 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
