Suspended Heart – 3D printable model from MakerWorld

MakerWorld

Decor

Suspended Heart

by JonasM · Decor

18.9k Downloads

5.4k Likes

11k Makes

Go to Model

Please check out my new smaller version for Valentine's and Mother's Day: Suspended Heart - Special Edition I wanted to create something special for Valentine's Day (it also makes a great gift for Mother's Day). It uses overhanging bridges (printed on the side) to create the illusion of a three-dimensional heart suspended by fragile strings. This model prints without supports in about 4.5 hours, 0.2mm layer height and wall generator set to Arachne in Bambu Studio. I also activated “Thick bridges” and “Detect Thin Walls” in the slice settings.I used Bambu PLA basic red, which did a good job for the many thin string overhangs.I added a dual color print profile, where the strings can be set to a different color. This technique is not new, my model is inspired by the “Suspended Hand” by STomHacks (https://www.printables.com/model/573397-suspended-hand).

heart valentine valentines day red suspended strings love bambu pla bambulab deco gift present floating overhang bridge multi color ams mother mothers day mothersday

Category

Decor

Source

MakerWorld

Published

30.01.2024

Updated

30.04.2026

What you need to print this: Beginner

Why?

no supports · 2 colors · 0.20mm layers

Support-free Single piece 2 colors / AMS

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Colors

2 (AMS/MMU recommended)

Layer height

0.2 mm

Est. print time

4.5 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Suspended Heart need supports when printing?

No supports needed for Suspended Heart — it's designed to print clean off the bed.

How long does it take to print Suspended Heart?

According to the design notes, Suspended Heart takes approximately 4.5 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

Is Suspended Heart beginner-friendly?

Yes — Suspended Heart is a solid beginner print. Nothing tricky going on here, good choice if you're just getting started.

What file format is Suspended Heart available in?

Suspended Heart is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Suspended Heart free to download?

Yes, Suspended Heart is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL