Thingiverse
Suspension Bridge
door nrandal
35
Downloads
35
Likes
0
Makes
You can print a single Suspension Support or multiple, there is not limit to how many you could connect in a row.
For each support print one Head, 4 legs and a joiner plate. Use any string of your choice. I used a string just think enough so that I could use knots and the slots on the joiner plates.
M3 x 8 or 10mm bolts for legs and head connections.
The track is optional and provides a full suspension bridge look but the strings connected to it are not supporting, they are just for looks.
Extra info:
The full bridge pictured uses the 350mm track.
The large hole in the head is for future expansion for an item that can rotate or be fixed in place using the small notch.
For each support print one Head, 4 legs and a joiner plate. Use any string of your choice. I used a string just think enough so that I could use knots and the slots on the joiner plates.
M3 x 8 or 10mm bolts for legs and head connections.
The track is optional and provides a full suspension bridge look but the strings connected to it are not supporting, they are just for looks.
Extra info:
The full bridge pictured uses the 350mm track.
The large hole in the head is for future expansion for an item that can rotate or be fixed in place using the small notch.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
