Thingiverse
SV02 DD Filament Guide
di MrHasBean
10
Download
11
Likes
0
Makes
***PLEASE NOTE***
I no longer use Thingiverse for posting or updating models. To ensure you have the latest version, please download the file from my Stuff3D profile on MakerWorld dot com.
Designed this for the SV02 when I changed it to direct drive, using concepts from a couple other filament guides. My SV04 IDEX has runout sensors which keep the filament neater when printing and wanted similar for the SV02.
There are two styles of rollers, one that uses a 608 bearing or a fully printable one. The bearing version will obviously be smoother running. You'll need two of whichever roller you choose, 2 of the axles and unless you have some laying around, 2 of the M3 T-nuts. The t-nuts require an M3 nut and you'll require a couple 10mm M3 screws to mount it.
Infill is your call. I accidentally left mine set at 100% from the previous job, but 50% or more should be ok.
I no longer use Thingiverse for posting or updating models. To ensure you have the latest version, please download the file from my Stuff3D profile on MakerWorld dot com.
Designed this for the SV02 when I changed it to direct drive, using concepts from a couple other filament guides. My SV04 IDEX has runout sensors which keep the filament neater when printing and wanted similar for the SV02.
There are two styles of rollers, one that uses a 608 bearing or a fully printable one. The bearing version will obviously be smoother running. You'll need two of whichever roller you choose, 2 of the axles and unless you have some laying around, 2 of the M3 T-nuts. The t-nuts require an M3 nut and you'll require a couple 10mm M3 screws to mount it.
Infill is your call. I accidentally left mine set at 100% from the previous job, but 50% or more should be ok.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!