Swan Ring and Earring holder

It's simple. It's pretty. It peps up your bathroom, living room, bedroom vanity or wherever you see fit! The swan can carry rings of several sizes (Example on the pictures show a womans ring and a mans ring, and holes for 7 pair of earrings on each wing divided into: 4 holes on the bottom of the wing to allow drop-type earrings 10 holes placed on the top and middle lines to allow Pin/Clutch earrings types even with smaller or larger sizes. See examples on the pictures. All holes are given enough space to allow larger type of earrings to not touch eachother and cause friction or issues with removal. About the print: I recommend printing with supports and the .3mf-file has supports included simply because of the around 45% overhang the wings are having. You are welcome to try without if you are sure about your printer and filament, it can be printed that way too, but be aware of the potential vibrations of the thinner wings on the higher print layers. In that case, I also recomme