Swappable/Customizable Nintendo Switch Dock Cover

Have fun with this swappable Nintendo Switch Dock Cover. This cover is for the “normal” Switch Dock, I don't know if the OLED-Dock is different. If your printer and filament is dialed in it should slide right over your dock and the magnets (Bambu Store D3x1mm - CA014 - see Bill of Materials) should slide in like a press in fit (otherwise use a tiny amount of glue). 5 magnets are needed for the holder, 5 for the cover. I have included three hueforge examples and a “negative part” that is used as a template so that you too can create covers. Instructions for your own covers (only needed if you want to design your own covers): 1.Download negative template2. Settings in Hueforge - remember the 1mm thickness of the magnets and adjust the min depth (most times I used 1mm + 3 or 4 layers) and a width of at least 180mm. 3. Setting up BambuStudio - Load your hueforge stl. (adjust your colors and settings) than right click on your part. Load in the previously downloaded template as a negativ