Swashleveltool 0 pitch

It's a 3D-printable swashplate leveling tool that can be used to set the swashplate at the correct height for 0-degree pitch and ensure it is perfectly level. It’s easy to use, but the head needs to be removed to use the leveling tool.

The idea is that the flybarless system is set to 0-degree pitch, with servo horns adjusted to 90 degrees. Once that’s done, you can use the tool to set the correct linkage length. Subtrims for the servo should only be used to make the servo horn reach 90 degrees—everything else should be adjusted with the linkage.

The file name will tell you if the tool works with your specific model.

It's super easy to print and requires no support. You can print it with a layer height between 0.15 mm and 0.20 mm.