SWEDISH BIRD HOUSE

This is a bird house designed to look like a traditional Swedish cottage with a small front porch.

You can decide if you want to print the house shell as one piece:
- gehaeuse_v2

or you can print the house shell in 3 parts:
- Floor: boden_v2
- Sidewall 1: fasssade_01
- Sidewall 2: fasssade_02_v2

There are also two mounting plates for the house available:
- montageleiste | for screw mounting (M6 or similar)
- montageleiste_2 | for zip tie, wire or string mounting

What you need:
- Patience ( My printing time was ~100h)
- Super Glue
- A drinking straw (5mm Outer Diameter) for the roof gutter
- A M6 Screw and nut or something similar to mount the birdhouse to the mounting braket
- 4 M4 Nuts and 4 Screws for the detachable roof
- I have also used black nail polish and painted the surface for the window and door opening black before i glued the parts to the house.

Additional notes:

- The standard birdhouse hole size is 30mm (einflugring_gewinde) and 45mm (einf