Thingiverse
Swiffer Pivot Head
von silasb
5
Downloads
2
Likes
0
Makes
This is my fix for a Swiffer that broke.
Printed with ABS, 25% fill. 0.2 mm height. 45 mm/s.
You need to print one of each side.
[Source File](https://cad.onshape.com/documents/c0034e209c334b06912457a3/w/9d4f8bd5ec8b42e8957cf70f/e/629564e257ec43eeb785203a)
Printed with ABS, 25% fill. 0.2 mm height. 45 mm/s.
You need to print one of each side.
[Source File](https://cad.onshape.com/documents/c0034e209c334b06912457a3/w/9d4f8bd5ec8b42e8957cf70f/e/629564e257ec43eeb785203a)
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
