Sylvanas

by Isotopos

86 Downloads

33 Likes

31 Makes

Download Model

sylvanas world of warcraft elf hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.7mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Green Transmission Distance: 10 PLA BambuLab Basic Orange Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer