Thingiverse
Syringe for soft plastics
von MrSnoWie
131
Downloads
76
Likes
0
Makes
A dose syringe for soft plastics for luremaking to press against molds.
Plastics as plastisol and other alike.
The pipe is made out of 150mm acrylic tubing with the dimensions ( outer 40mm, inner 36mm )
Just add a o-ring of your choise.
Also made a cut version to easier be printed that you can glue/abs-acetone together.
Every 10mm on the tube is ca 1cl if my calcurations is right :P!
( If you print with abs, be sure to over dimension a little bit due to shrinkage, because I forgot that on mine so I had to do alot of filing until the nozzle could be put on the acrylic tube :P )
Plastics as plastisol and other alike.
The pipe is made out of 150mm acrylic tubing with the dimensions ( outer 40mm, inner 36mm )
Just add a o-ring of your choise.
Also made a cut version to easier be printed that you can glue/abs-acetone together.
Every 10mm on the tube is ca 1cl if my calcurations is right :P!
( If you print with abs, be sure to over dimension a little bit due to shrinkage, because I forgot that on mine so I had to do alot of filing until the nozzle could be put on the acrylic tube :P )
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
