Slicer Discord
T-72B3 (Old Version) – 3D printable model from MakerWorld MakerWorld
Other Miniatures

T-72B3 (Old Version)

79 Downloads
24 Likes
43 Makes
Go to Model
This is the old version of this model. You can still print if you like but the updated version can be found here.History: The T72 is a Soviet main battle tank that entered production in 1973. It was largely based on the T-64 and Object 167M. Since then around 25,000 T72's have been produced and is currently being used by 35 countries. The T-72B3 entered production in October of 2012. It is a modernization of the T72B and features upgrades to the main gun, fire control system, ERA protection and mobility. Since then Russia has further improved the design of the T-72 in the T-72B3M variant. Description:My recreation was based off of images and then made in the game Stormworks and the exported out of the game. I based it largely on the T-72B3. It took around an hour to make and another 2ish hours to print. The model is also angled in such a way to avoid an overwhelming amount of support that is difficult to remove. All you should need to remove them is a pair of side cutters.
Category
Other Miniatures
Source
MakerWorld
Published
Updated
What you need to print this: Advanced Medium confidence
Why?
supports needed · very large print
Single piece Supports required May need scaling or splitting
Supports 2/3
Assembly 0/3
Settings 1/3
Bed size 3/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
Min. bed size
300 mm (Extra large)
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Which 3D printer is suitable for T-72B3 (Old Version)?
Any FDM printer should handle T-72B3 (Old Version) just fine. It's been printed on machines like Bambu Lab X1C, Prusa MK4, Creality K1 Max, Anycubic Kobra Max. A minimum build volume of 300 mm is recommended.
Does T-72B3 (Old Version) need supports when printing?
Yes, T-72B3 (Old Version) will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.
What file format is T-72B3 (Old Version) available in?
T-72B3 (Old Version) is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is T-72B3 (Old Version) free to download?
Yes, T-72B3 (Old Version) is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection