T-800 Terminator - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 130x200.92mm in size You may print at higher layer heights below the Min Depth of 0.24mm The Max Depth is 2mm and the Actual Depth is 2mm Swap Instructions:Start with BlackAt layer #3 (0.32mm) swap to WhiteAt layer #12 (1.04mm) swap to BlackAt layer #13 (1.12mm) swap to RedAt layer #20 (1.68mm) swap to White for the rest.