Slicer Discord
Table Edge Power Strip Extension Socket Holder – 3D-printbaar model van MakerWorld MakerWorld
Organizers

Table Edge Power Strip Extension Socket Holder

181 Downloads
127 Likes
78 Makes
Model downloaden
Update: Added an optional TPU pad you can glue to the underside of the upper jaw on the bracket for extra grip This model allows you to attach an power extension lead to the edge of a table without damaging the table. It should work with any extension that has a fixing slot on back. You will need to print out at least 2 brackets, and if your extension has more than 2 fixing holes then you can print out one bracket for each. You will need a 4mm button head bolt between 15-25mm, plus a matching nut. The bolt must be able to fit into the slot. Each bracket consists of 3 parts.The tightening wheel - The same model is used for all variants.The fixing bolt - There are 2 variants, to use depending on the bracket body: long and short.The bracket body - There are 4 variantsRegular Height - This refers to the face that the extension tightens against. It has 2 variants. Wide Jaw - For table thickness of 10-50mm (Use the wide jaw fixing bolt).Narrow Jaw - For table thickness of 10-30mm (Use the na
Categorie
Organizers
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Waarom?
3-delige montage · uitgebreide nabewerking
Hardware nodig
Supports 1/3
Montage 1/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 2/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
TPU
Nabewerking
Lijmen, Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie