Table Leg Clamp with adjustable screw

I created this because I have a travel trailer and the dinnette table is wobbly. The table doesnt have any adjustment that could see. So I decided to create my own.

I do recommend to when printing to use a 50% infill or higher as lower infills may cause the screws to break.

You will need some self tapping screws to attach the clamps to the legs. The depth would be 1.5 inches but you can get away with 1.25 inch screws. The table leg radius is 25mm.

First time screwing in the screws there will be resistance but after that the screws adjust easily.