Under Table Storage Drawer

Design ConceptThis 3D printed under-table storage drawer is designed to install directly into a wooden surface using dry wall screwsand works easily in small spaces. The design does not require any supports and prints in 4 parts for easy assemblyUsesIdeal for organizing stationery, electronic gadgets, or small personal items, this drawer keeps your workspace tidy and efficient. It’s perfect for home offices, dorm rooms, and small apartments. I used this to organise my workspace where I assemble my prints and solder electronic parts.Printing RecommendationsMaterial: Any material will do but PLA or PETG should be sufficient for durability and ease of use.Infill: 15% should be fine (All of mine are printed at 15% infill)Supports: Not requiredLayer Height: 0.2mmAssembly Instructions🔧 Drawer AssemblyTo install the drawer holder underneath the surface you’ll need 4 wood tapping screws, I used dry wall screws. There is a larger hole in the design at the bottom of the drawer that will allow you to fit a screwdriver or an extended bit holder as indicated in the pictures.- Face &🔧 Handle AssemblyYou will need 2 M3 heat inserts for the drawer handle. A 16mm or shorter M3 screw can then be placed through the inside of the drawer into the face and screw into the heat inserts of the handles. Alternatively you can just superglue the parts together or try using a 4mm self tapping screw to tap the plastic.After assembling all the parts the drawer should slide cleanly into the holder.