Tacoma Bed Divider

This is a divider to keep groceries and such close to the cab and not all over the the bed. It's fully adjustable to slide up and down the bed rail of a Tacoma. Completely customizable. Use your imagination. I purchased all PVC supplies from Home Depot.

Requires:
4 - 3/8 x 3" U-Bolts
4 - 3/8 Nylon Lock Nuts
4 - 3/8 Nuts
4 - 5/16 x 1" Bolts
6 - 5/16 Nuts
A box of 8 x 1/2" Screws (I used hex washer head cause I had them laying around.)
2 - 10FT - 2 1/4 PVC (Measurements are in one of the images.)
6 - 2 1/4 PVC T's
4 - 2 1/4 PVC Elbows
PVC Glue (Optional)

Printable Parts Required:
2 - Rail Mount (I printed at 15% fill.)
2 - PVC External with Stabilizers (I printed at 15% because they take so long to print.)
2 - Adjustment (I printed at 15%.)
4 - Rail Stabilizer (I printed at 60%. They are under bit of stress at times to keep the divider from swinging.)
2 - PVC Internal (I printed at 15%.)
4 - Nut Wrench (I printed at 15%.)
1 - Guide (Optional. This is a quick print