Thingiverse
Tactical 7000hds guy ring
by GI1MIC
21
Downloads
10
Likes
0
Makes
A simple "Guy ring" for use with the sotabeams Tactical 7000hds 7m mast.
Inside hole is 41mm which should "catch" at the junction of sections two & three of the mast.
I used 2mm (100lb) paracord from Amazon along with these https://www.thingiverse.com/thing:4123572 to provide tension.
The antenna wire at the top of the mast is held in place by some thick wire (stripped feeded cable) per the photos.
If you want to get fancy use a UV safe material.
Inside hole is 41mm which should "catch" at the junction of sections two & three of the mast.
I used 2mm (100lb) paracord from Amazon along with these https://www.thingiverse.com/thing:4123572 to provide tension.
The antenna wire at the top of the mast is held in place by some thick wire (stripped feeded cable) per the photos.
If you want to get fancy use a UV safe material.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!