Tails(Sonic the Hedgehog)

Tired of having your prints turn out noting like the posted “photo”? Then you've come to the right spot, I only post photos of the actual print and not the file they were generated from. If you want to make a request and/or get FREE *Patreon exclusive* models, members only models, and commercial licenses to sell your physical prints visit my Patreon in bio http://patreon.com/JustBe3D Instructions Can be rescaled just remember not to change the Z axis. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Jade White At layer #19 (1.6mm) swap to Black At layer #20 (1.68mm) swap to Orange At layer #24 (2mm) swap to Jade White At layer #25 (2.08mm) swap to Black At layer #26 (2.16mm) swap to Red At layer #31 (2.56mm) swap to Jade White for the rest.