Tamiya King Yellow Electronics Platform Mount Holder

Despite its size, I found the space available for mounting the speed controller, receiver and other electronics quite unsatisfying. Especially the King Yellow has a huge volume under its body -- so I decided to use some of it, by adding a platform to mount my electronics on.

Features:

* Large area to place components on
* Many slots for cables ties
* Antenna mount with some holes
* Mount position for a ESC power switch (19 mm hole distance, 2 mm diameter)

The platform uses all provided printable parts (remember to print two feet!) and screw holes already existing on the model. You only need some additional M3 screws (counter-sunk and regular head) for the platform itself and the feet holding it. You may need to drill out some of the holes with a 3 mm drill bit to let the screws move freely.

Material needed:

* 4x M3 screws, 10 mm, counter-sunk head for mounting the platform to the girders
* 2x M3 screws, 10 mm, regular head for mounting feet to frame
* 2x M3 screws,