Thingiverse
Tank model Holder
par Herde
6
Téléchargements
10
Likes
0
Makes
A good way to hold your tank during painting, or if you add to much bling and you don't want to risk breaking it !
You need to add an M5x40mm chamfer head screw, in order to secure the tank.
There is a threaded mobile part inside the base, to prevent the screw for falling once you
remove the model.
You also need two M5x12mm chamfer head to secure the two holder to the base.
I include a threaded one and a fancy one where you have to add a threaded insert for 3d
printed parts.
There are also some holes for insert on the side, for future use !
It is also mandatory to have an M5 nut in the lower hull of your vehicle !
You can use my oversize hex nut holder.
You need to add an M5x40mm chamfer head screw, in order to secure the tank.
There is a threaded mobile part inside the base, to prevent the screw for falling once you
remove the model.
You also need two M5x12mm chamfer head to secure the two holder to the base.
I include a threaded one and a fancy one where you have to add a threaded insert for 3d
printed parts.
There are also some holes for insert on the side, for future use !
It is also mandatory to have an M5 nut in the lower hull of your vehicle !
You can use my oversize hex nut holder.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
