Slicer Discord
3DSEARCH / Garden / Tap Insert
Tap Insert – 3D printable model from MakerWorld MakerWorld
Garden

Tap Insert

by Benjamin · Garden
0 Downloads
1 Likes
0 Makes
Go to Model
Tap insert to replace the original one that the frost pushed out, to suit a holman,you will need an o-ring with approx measurements of 11.7mm id17.7mm od3.4mm thickthen you place the o-ring in and insert the tap insert.then screw on the hose attachment
Category
Garden
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
PLA, ABS
Min. bed size
50 mm (Small)
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

Benjamin also publishes on

151 additional models across 5 more platforms

Printables
93 models
♥ 1,057 ↓ 9,004 ⚒ 53
MyMiniFactory
20 models
♥ 42
GrabCAD
19 models
♥ 470 ↓ 15,674
Thingiverse
11 models
♥ 6,570 ↓ 7,171 ⚒ 38
MakerOnline
8 models
♥ 232 ↓ 524
Verified by matching model titles across platforms.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Garden tap hose adaptor 1/2" to 3/4"
Garden tap hose adaptor 1/2" to 3/4"
by RedDukem
↓ 849 ♥ 13
Garden hose tap adapter 5/8" to 3/4" (BSP)
Garden hose tap adapter 5/8" to 3/4" (BSP)
by poggler
↓ 70 ♥ 62
Garden tap hose adaptor 1/2" to 3/4"
Garden tap hose adaptor 1/2" to 3/4"
by Reddukem
↓ 30 ♥ 19
Garden tap hose adaptor 1/2" to 3/4"
Garden tap hose adaptor 1/2" to 3/4"
by Red Dukem
↓ 16
Garden Hose Tap Coupler
Garden Hose Tap Coupler
by Makana
↓ 15 ♥ 4
Garden Hose Tap Screw 20mm
Garden Hose Tap Screw 20mm
by Franky Egan
↓ 9
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection