Tapo C110 Adjustable Camera Mount for A1

This is a mount for the Tapo C110 IP Camera for the Bambu A1 printer. The C110 is an ideal upgrade to the awful built in camera as it is cheap, high resolution, wide angle and light. This mount clips to the side of the gantry and is adjustable for height and angle. Simply print out all of the parts in the profile (you could use regular 10mm bolts or the included 3D printed ones). Clip the adaptor to the side of the machine as per the image and bolt the parts together. You will need to pop the base off the C110 camera. It will be tight, but it is just a plastic ball in a socket. Once off, pop the camera in the mounting arm socket, adjust and you are good to go. NOTE: If you have the frame supports on from the Bambu AMS lite top mount, make sure the bracket is pulled forwards a few mm to ensure it clears the frame supports. If you see a Homing Failure, the likely cause of the camera bracket and Frame support touching. UDPATE: I found the ball joint kept on coming loose, so have updated t