Taurus SHO Grille Light Buckets

I printed these at 120% scale. This may differ, depending on your personal preference. These have holes on the back side for zip ties to mount to grille (this was actually the best mounting solution I could come up with after many failed iterations). Buckets must be mounted first before LED strips are pressed in! These buckets were designed for the length of the LED's in the below link. The LED's will need to be trimmed shorter (follow cut line on actual LED). After LED's are cut, it is a MUST to apply some clear silicone or similar to the end you cut, or these will no longer be water resistant. Wires were fed through the back side of the grille and tapped into a key-on fuse (red wire on LED harness) and yellow wire (LED harness) to positive side of turn signal. I am not responsible to any damage to your vehicle! feel free to wire these any way you like!



LED's: https://www.amazon.com/LEADTOPS-Flexible-Headlight-Waterproof-Decorative/dp/B07M7JFNMQ?pd_rd_w=vsd6Q&pf_rd_p=c948275e-