Slicer Discord
TBS Discovery Micro FPV Drone – 3D-Druckmodell von Thingiverse Thingiverse

TBS Discovery Micro FPV Drone

39 Downloads
49 Likes
0 Makes
Zum Modell
This thing is based on Micro TBS Dicovery from @Islemunda. The difference is that while the original is suitable for the Hubsan X4 electronics, this was changed to receive a more powerful setup with brushless motors and FPV.

Below are the parts needed to build it, but you can adapt and change anything you want.

Don't worry about the domain "outro.site" it's my click counter, just like goo.gl or bit.ly. It will redirect you to Banggood.

►Flight controller: http://outro.site/f998d16471/
►Motors: http://outro.site/e8ffd16473/
►Props: http://outro.site/d3c3716476/
►ESC's (option 1): http://outro.site/03be316474/
►ESC's (option 2): http://outro.site/1f5e316475/
►FPV: http://outro.site/9e9b116472/
►Receiver: http://outro.site/0764316470/
►Screws: http://outro.site/a7ba316479/

You will need also a voltage regulator because it's a 2S drone and the FPV is 5V, so...

►Voltage regulator (option 1, fixed to 5V): http://outro.site/52aa516478/
►Voltage regulator (option 2, vari
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen