TBS Unify Pro32 HV Bracket

This bracket is intended to mount the TBS Unify Pro32 HV VTx on standard 30.5 mm x 30.5 mm mount holes. The bracket does not have a bottom plate as I mounted it directly onto carbon fibre (i.e. at the bottom of the stack or standalone) for better heat dissipation, as recommended in the manual.

The holes are modelled at 2.8 mm to allow good threading. I recommend you thread the holes using M3 metal screws if you plan on using nylon screws for mounting.

There is a cut-out for the USB port as well as cut-outs for the cable connector and the MMCX-SMA pigtail. This design allows for free rotation of the MMCX end of the pigtail without putting any strain on the connector.

Enjoy!

**Update 24 February 2020**

Fixed the wall thickness of the mounting post adjacent to the USB cut-out. This wall on the original model was too thin and could not be printed with a 0.4 mm nozzle. This modification may make it difficult for certain USB connectors to fit through the cut-out.