Thingiverse
TC electronic G-System light support
par diegobellagamba
1
Téléchargements
2
Likes
0
Makes
Light up your G-System!
These 4 brackets will remove approximately 1 kg of weight from your G-System.
I designed these brackets because I decided to lighten my pedal board. I was having to carry 13Kg of pedal board on my shoulder. The original metal supports of the G-System weigh about 1.2Kg, while these in PLA only 0.2.
Then with other measures that have nothing to do with 3D printing, I arrived at 10Kg of total weight of my pedal board.
Print at 20% infill. You have to mirror the two STLs with your slicer, for the left side of the G-system. You will also need 1 nut M6 and a screw M6 a little longer than the original, to fix everything to the G-system.
These 4 brackets will remove approximately 1 kg of weight from your G-System.
I designed these brackets because I decided to lighten my pedal board. I was having to carry 13Kg of pedal board on my shoulder. The original metal supports of the G-System weigh about 1.2Kg, while these in PLA only 0.2.
Then with other measures that have nothing to do with 3D printing, I arrived at 10Kg of total weight of my pedal board.
Print at 20% infill. You have to mirror the two STLs with your slicer, for the left side of the G-system. You will also need 1 nut M6 and a screw M6 a little longer than the original, to fix everything to the G-system.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
