TD-1 PTFE Case

This case is designed to be able to add ECAS04 PTFE couplers to your TD-1 to use in-line. If you are looking for the TD1s PTFE Case, it can be found HERE. Commonly this will be used with AMS systems to auto detect the color of your filament and assign per lane of your AMS. Currently this is only supported by the BoxTurtle. I worked directly with the AFC guys to make this integration with BoxTurtle as seamless as possible. Instructions can be found HERE. Eventually I hope to adapt this same approach to other Klipper based AMS systems. Also, I am in talks with SoftFever to get this AMS information passed into Orca Slicer as well. More to come on that. For this case you will need the following:Top printed caseBottom printed case2 x ECAS04 Couplers (like these - https://a.co/d/bE2KIxq)4 x M3x30 FHCS (like these - https://a.co/d/7WSNyGw) BHCS or SHCS can be used instead if you don't care that they are countersunk