Tea Dispenser

# Overview
Remixing this awesome Tea Dispenser design from enFoo. I noticed a few minor fillet errors in the original design and decided to remake it. The dimensions for the tea bags are slightly larger that the original model. Thanks Again to enFoo for including the STEP files in his design.

### Design Notes:

Wall thickness: 1.2mm
Teabag Dimensions: 70 mm X 80 mm

# Printing:

STL orientation is correct for printing without supports.

### Scaling:

I will add to this section based on my findings and the comments of users.

# Assembly:

With the use of a rail guide, place the first mount in the desired location and mark the center of the holes. Remove the Mate and drill the first two holes using a 7/64" straight bit. Fasten the Mount to the surface using #8 wood screws. For 1/2" material use 5/8" screws. For 3/4" material use nothing larger than 3/4". Repeat these steps using the spacer as a reference for any following Mounts. The nominal distance between the drill