#TEAMWATER Keychains

These are a series of 3 keychains in support of #TeamWater. It is an ended fundraiser to bring clean and fresh water to everyone around the world. Thank you to everyone who helped support! The $40 million goal was achieved, and 2 million people have clean drinking water for life! You can visit https://teamwater.org/ to see the fundraiser or go to wateraid.org to support.The first keychain is a simple round one with the logo, a water drop, and it has a diameter of about 50 mm (2 inches), and is about 6 mm (0.25 inches) tall. Infill density between 10% and 15%, no skirt necessary.The second keychain has the logo on it as well, but also has #Team Water on the back of it. It is the same dimensions, but I would recommend standing this keychain up for the best print. Supports are recommended but not necessary. Same settings as the first keychain.The third keychain says #TeamWater and is about 89 mm (3.5 inches) long, 25 mm (1 inch) wide, and still 6 mm (0.25 inches) tall. Same settings as the first setting.Based on the #TEAMWATER fundraiser at https://teamwater.org/