Tejo Stealth Drone Valorant

Model of the Tejo stealth drone ability from Valorant. But listen closely, the assembly instructions are insane. First, you need a vise grip, a less than 1.75 mm punch tool, hammer, and a drill with a slightly greater than 1.75 mm diameter. Once you have the items, you need to remove supports from the main body. Then, you must use the vise to hold the pieces while you use the hammer and punch to take out the supports in the small holes. After this, line up both pieces, and run the drill through the holes to widen them slightly. Once this is done, you can cut off a bit of filament from a spool, and run it through the newly formed hole, trimming as you see fit. Repeat at the base of the drone, and with the base of the one type of flap. I will say, to get the last flap assembly in place, I was forced to take out another one to fit my drill in. It may be beneficial to look at my pics to see how it all goes together. Sorry this is so complicated, I wanted to try using filament as an axle, B