Thingiverse
Teleprompter
door jmgoodwin
5
Downloads
9
Likes
0
Makes
Just a simple teleprompter that can be printed on an Ender 3v2 or other printer with a print bed at least 210 mm x 210 mm. I used Speedy777's design as a jumping off point. The arms fit a Samsung Galaxy Tab. A YouTube video showing how to put it all together can be found at https://youtu.be/H955T42xZpw.
In addition to the filament, you'll need:
16 - m 3.5 x 25mm bolts
16 - m5, 8mm nuts
1 - 1/4" x 20 winged nut and washer
1 - 8" x 10" 2mm thick picture frame glass
2 - small binder clips
piece of heavy black cloth
If you've got a bigger print bed, there are files for the top and frame sides that are single pieces. These files start with the words Big Bed.
Assembly video is available on YouTube at: https://youtu.be/H955T42xZpw.
In addition to the filament, you'll need:
16 - m 3.5 x 25mm bolts
16 - m5, 8mm nuts
1 - 1/4" x 20 winged nut and washer
1 - 8" x 10" 2mm thick picture frame glass
2 - small binder clips
piece of heavy black cloth
If you've got a bigger print bed, there are files for the top and frame sides that are single pieces. These files start with the words Big Bed.
Assembly video is available on YouTube at: https://youtu.be/H955T42xZpw.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
