Telescope solar filter

To complete this project you will need:

* [magnets](https://www.aliexpress.com/item/33047741868.html)
* solar filter film (source it from your local astronomy vendor)
* 5min epoxy

Measure the diameter of your scope as precisely as you can and add 1mm for good fitting.
Go to the customizer and customize each of the 3 pieces, you should only need to change the parameter `dew_shield_diameter`. Optionally you can play with the other parameters to add more magnets or change different dimensions of the design.

Once you have the 3 parts printed:
* glue magnets to the main ring using epoxy, make sure they are oriented with the right polarity. It helps if they are all the same, you can use their counter part to hold them in place while the epoxy dries.
* glue magnets to the removable ring, again make sure magnet polarity is correct, meaning you can attach the 2 rings together and they are hold in place by the magnets. If the polarity is wrong the rings will repel. It helps to use