Thingiverse
Temper - ESP8266 temperature sensor
door mcer12
93
Downloads
72
Likes
0
Makes
This is a case for Temper - open source ESP8266 temperature sensor I made. Temper has a 13x7 pixel display, 30~40uA deep sleep consumption, TP4054 for charging and microUSB.
You can download all resources required to make your own Temper on it's Github page here:
https://github.com/mcer12/Temper-ESP8266
BOM + Pick&place + Gerber included.
Print without supports, 100% infill (enable supports if you want to print the version with cutout for the breakout header).
You can optionally print the base for attaching the sensor to the wall. You will need 4 or 6 (for stronger hold) magnets for that.
You can download all resources required to make your own Temper on it's Github page here:
https://github.com/mcer12/Temper-ESP8266
BOM + Pick&place + Gerber included.
Print without supports, 100% infill (enable supports if you want to print the version with cutout for the breakout header).
You can optionally print the base for attaching the sensor to the wall. You will need 4 or 6 (for stronger hold) magnets for that.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
