Temperature tower 195-220

Temperature tower suited for testing between 195Cº and 220Cº
How to use this with Cura:

- In Cura set print temp to 220Cº
- Layer height Dynamic Quality 0.16 mm
- I the menu, look for Post-Processing -> Modify G-Code
- Click "Add a script".
- Add ChangeAtZ
- Specify Trigger to layer number. And set the temperature accordingly.
- Click "Add script" again for each temperature change.


Print will start at 220. So at layer 80, lower temperature with 5 degrees to 215Cº.
Then add the same script again, this time set the layer trigger to 158 and degrees to 210C.

Like this:
Layer 80 = 215Cº
Layer 158 = 210Cº
Layer 233 = 205Cº
Layer 313 = 200Cº
Layer 386 = 195Cº

Other info:

If you want to print at a different quality, you click Slice in Cura and use the layer slider on the right to se which layer to should change the temperature.

When you're done. Remember to disable the scripts. You don't have to delete them, just remove the checkmark next to "Enabled"