Thingiverse
Tensegrity arc
door alecs_form
66
Downloads
87
Likes
0
Makes
Tensegrity arc.
Tensegrity is a structural principle where elements under compression do not touch each other. They're are only connected and hold in place by tensioned members (usually cables). The term "tensegrity" is short for "tensional integrity and was proposed by Buckminster Fuller in the 1960s.
This experimental model is a successor to a recent study on fabricating such a tensegrity structure. The boundary conditions are set to avoid assembly of the members and making additional support material obsolete. The focus here is on FFF/FDM as fabrication method. The larger elements are only connected through fine strands to each other for stabilization. They're just filament extruded into the air. This technique is called bridging.
Geometry was created using Rhino/Grasshopper.
Tensegrity is a structural principle where elements under compression do not touch each other. They're are only connected and hold in place by tensioned members (usually cables). The term "tensegrity" is short for "tensional integrity and was proposed by Buckminster Fuller in the 1960s.
This experimental model is a successor to a recent study on fabricating such a tensegrity structure. The boundary conditions are set to avoid assembly of the members and making additional support material obsolete. The focus here is on FFF/FDM as fabrication method. The larger elements are only connected through fine strands to each other for stabilization. They're just filament extruded into the air. This technique is called bridging.
Geometry was created using Rhino/Grasshopper.
alecs_form publiceert ook op
11 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
