Tentacle Refrigerator Magnet – 3D printable model from MakerWorld

MakerWorld

Creatures

Tentacle Refrigerator Magnet

by SillyStringStudios · Creatures

177 Downloads

82 Likes

59 Makes

Go to Model

This was my first remix project that I feel good enough about to share, I hope you'll enjoy this fun little 7 hour AMS print Enable supports I edited the wall hook in Tinkercad to remove the base, angled it to my liking, scaled it up for magnet support, added 10mm x 2mm cutouts for magnets to sit in then off to the Bambu Studio paint shop for several hours. Its been a journey, but I'm pleased with the outcome and my wife LOVED it. Original Model: https://www.thingiverse.com/thing:4822459

fridge kitchen octopus aquatic marine saltwater cephalopod decoration miniature scifi cthulhu pirate sci-fi sci fi creepy underwater water alien

Category

Creatures

Source

MakerWorld

Published

22.01.2024

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed · 2 colors · significant post-processing

Single piece Supports required 2 colors / AMS Hardware needed

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 2/3

Printer

FDM / FFF

File format

STL

Material

Colors

2 (AMS/MMU recommended)

Est. print time

7 h

Post-processing

Painting, Hardware

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Tentacle Refrigerator Magnet need supports when printing?

Yes, Tentacle Refrigerator Magnet will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print Tentacle Refrigerator Magnet?

According to the design notes, Tentacle Refrigerator Magnet takes approximately 7 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Tentacle Refrigerator Magnet available in?

Tentacle Refrigerator Magnet is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Tentacle Refrigerator Magnet free to download?

Yes, Tentacle Refrigerator Magnet is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL