Terminator Hueforge

https://www.patreon.com/cw/3D_MENTIEL Si vous aimez mon travail, souhaitez vendre mes créations ou trouver des modèles exclusifs venez faire un tour sur mon Patreon Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 199.98x199.98mm in size You may print at higher layer heights below the Base Thickness of 0.8mm The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.2 #c3aca3 PLA Sunlu beige Transmission Distance: 6.7 #ffffff PLA Forshape White Transmission Distance: 5 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #11 (0.96mm) swap to beige At layer #20 (1.68mm) swap to White At layer #26 (2.16mm) swap to Black At layer #27 (2.24mm) swap to Red for the rest.