Tesla Model S lowering links - front

UPDATE: These are now obsolete; I have introduced a newer and more reliable version (https://www.thingiverse.com/thing:2277020)

These are lowering links of various lengths that replace the stock links that came with your air suspension. You'll find a link at each corner of the car. Select a new link length to adjust the ride height of the car at that corner. The links in this project are for the front of the Model S car (all years). See another project for the rear links, which are 20mm longer and a different design.

Print the links out on ABS plastic using Cura or your favorite slicer, I found thicker layers (0.3mm) make a stronger product. You will need to print 2 links, one per side of the car (front). Typically, you select 2 links the same length for both sides of the front. Unless you find your car was poorly calibrated, you can select different lengths to remove the difference and get a more consistent height at that end of the car.

These are fixed length links for front