tetris logo

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x133.18mm in sizeYou may print at higher layer heights below the Min Depth of 1mmThe Max Depth is 2.9mm and the Actual Depth is 3mmFilaments Used: PLA+ Sunlu Blue Transmission Distance: 4 PLA+ Sunlu Red Transmission Distance: 6 PLA+ Sunlu Orange Transmission Distance: 5 PLA+ Sunlu Yellow Transmission Distance: 10This print uses 4 unique filamentsSwap Instructions: Start with Blue At layer #24 (2mm) swap to Red At layer #30 (2.48mm) swap to Orange At layer #31 (2.56mm) swap to Yellow for the rest.