Thingiverse
Texas Tech Logo
door tomiscampbell
12
Downloads
11
Likes
0
Makes
Just a simple Texas Tech logo. I have included the F3D file for anyone who wants to make any changes to it in Fusion360.
MultiColor Logo Instructions (Cura):
*The printer must have advanced pause enabled in the firmware*
1. Load the .STL into Cura
2. Set the layer height
For Initial Layer 0.3mm and all other layers 0.2mm the key layers are -6- and -11
For all layers 0.2mm, the key layers are -7- and -12
3. In the top left corner chose: Extentions>Post Prossesing>Modify G-Code
4. From the drop-down menu: Add a script > Filament Change
Set the layer to the first key layer number and set the Initial Retraction to 10mm
For printers with the layer change function enabled all other values must be set to
zero or the printer will add both values together
5. From the drop-down menu: Add a script > Filament Change
Set the layer to the second key layer numbe
MultiColor Logo Instructions (Cura):
*The printer must have advanced pause enabled in the firmware*
1. Load the .STL into Cura
2. Set the layer height
For Initial Layer 0.3mm and all other layers 0.2mm the key layers are -6- and -11
For all layers 0.2mm, the key layers are -7- and -12
3. In the top left corner chose: Extentions>Post Prossesing>Modify G-Code
4. From the drop-down menu: Add a script > Filament Change
Set the layer to the first key layer number and set the Initial Retraction to 10mm
For printers with the layer change function enabled all other values must be set to
zero or the printer will add both values together
5. From the drop-down menu: Add a script > Filament Change
Set the layer to the second key layer numbe
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
