TFT Taphandle

This is a tap handle for my homebrew. Make your custom labels, convert them to 240x320 24bit bmps, save them on the sd card, and insert in the sd card slot that is build onto the display shield. Touch screen to flip through. The resistive touch screen isn't very sensitive, so you won't accidentally flip between labels all the time. Does need to be plugged in to 7-12 volts, batteries wouldn't last very long.

You'll also need some half inch x #4 screws to hold the parts together, an arduino (or compatible), a microsd card, and a MCUFriend compatible display (I used this one https://www.amazon.com/HiLetgo-Display-ILI9341-240X320-Arduino/dp/B0722DPHN6/ref=sr_1_1?dchild=1&keywords=MCUFriend&qid=1589309760&sr=8-1).

Prints in 3 parts. The back, case and stem. arduino screws onto the standoffs on the back, stem has the threads so it must be printed with the top down. Case is the front/frame. Screw the back and the stem to the case with #4 screws. the arduino code is just pasted